追溯设置指南
收回设置指南
Retraction Settings Guide
Optimal retraction settings by extruder type and material
Recommended Settings (Bowden + PLA)
Retraction Distance:4-5 mmRetraction Speed:40-50 mm/sRestart (Un-retract) Speed:30-40 mm/sZ-Hop Recommendation:0.2-0.4 mm
Stringing Tip: Dry filament reduces stringing significantly.
Bowden systems need longer retraction due to filament elasticity in the PTFE tube. Start at the lower end and increase if stringing persists.
通过此免费的回缩设置指南快速获得准确的结果。一切都在您的浏览器本地运行，以实现最大程度的隐私保护。
Related Tools You Might Like
Post Processing Guide
Related 3D printing tool — post processing guide
Use tool →Bed Adhesion Guide
Related 3D printing tool — bed adhesion guide
Use tool →Print Time Estimator
Related 3D printing tool — print time estimator
Use tool →Support Material Estimator
Related 3D printing tool — support material estimator
Use tool →Text to Hex Encoder
Related tool — text to hex encoder
Use tool →Tool Information
分类
🔧 3D Printing
类型
⚡ 在浏览器中处理
标签