床位粘接指南
贴床指南
Bed Adhesion Guide
Recommended bed settings and adhesion methods by material
PLA Settings
Recommended Bed Temp:50-60°CNozzle Temp:190-220°CAdhesion Method:Glue stick or blue tapeFirst Layer Speed:15-20 mm/sFirst Layer Height:0.2-0.3 mmBest Surfaces:PEI, Glass, Blue Tape
Removal Tip: Let the bed cool completely; PLA releases naturally from PEI or glass when cooled below 40°C.
免费床粘附指南，可立即获得结果。无需帐户，可在任何设备上使用，完全私密。
Related Tools You Might Like
Post Processing Guide
Related 3D printing tool — post processing guide
Use tool →Print Failure Diagnosis Tool
Related 3D printing tool — print failure diagnosis tool
Use tool →Nozzle Flow Rate Calculator
Related 3D printing tool — nozzle flow rate calculator
Use tool →Spool Compatibility Checker
Related 3D printing tool — spool compatibility checker
Use tool →Holster Sizing Guide
Related tool — holster sizing guide
Use tool →Tool Information
分类
🔧 3D Printing
类型
⚡ 在浏览器中处理
标签