Şam Katman Hesap
Bu ücretsiz online araçla damascus katmanı hesaplayın
Damascus Layer Calculator
Calculate the resulting layer count in Damascus / pattern-welded steel based on your initial billet layers and number of folds.
Results
Initial Layers
2
Number of Folds
5
Total Layers
64
Formula
2 × 25 = 2 × 32 = 64 layers
Progressive Layer Count
Recommended Patterns for 64 Layers
Twist Pattern
Helical twist creates a rope-like appearance when cut and flattened.
Technique
Twist the billet 360° along its length, then forge flat.
Ladder Pattern
Horizontal rungs across a vertical grain — resembles a ladder.
Technique
Press grooves into billet, then forge flat to spread grooves into ladder rungs.
Raindrop Pattern
Circular "raindrop" impressions reveal concentric ring patterns.
Technique
Press dimples (ball peen or press die) into surface, then forge flat.
Star / Persian
Star or flower-like radial patterns visible on the cross-section.
Technique
Billet is forged into a square, then twisted and forged into round bar.
Layer Count Reference Table
Resulting layers based on initial billet count and number of folds.
| Folds | 2 Initial | 3 Initial | 4 Initial | 5 Initial |
|---|---|---|---|---|
| 0 | 2 | 3 | 4 | 5 |
| 1 | 4 | 6 | 8 | 10 |
| 2 | 8 | 12 | 16 | 20 |
| 3 | 16 | 24 | 32 | 40 |
| 4 | 32 | 48 | 64 | 80 |
| 5 | 64 | 96 | 128 | 160 |
| 6 | 128 | 192 | 256 | 320 |
| 7 | 256 | 384 | 512 | 640 |
| 8 | 512 | 768 | 1,024 | 1,280 |
| 9 | 1,024 | 1,536 | 2,048 | 2,560 |
| 10 | 2,048 | 3,072 | 4,096 | 5,120 |
How to Use This Calculator
- Select the number of initial layers in your billet (typically 2 alternating steels).
- Choose how many times you plan to fold and weld the billet.
- The calculator shows the total resulting layer count and progressive growth per fold.
- Review the recommended patterns that work best with your resulting layer count.
- More layers produce finer patterns but require more welding passes — balance quality with practical limits.
Related Tools
All calculations are performed locally in your browser. No data is sent to any server. Results are for reference only — actual Damascus patterns depend on forge technique, steel choice, and etching conditions.
Anında sonuçlar veren ücretsiz şam katmanı hesaplayıcısı. Hesaba gerek yok, her cihazda çalışır, tamamen özeldir.
Related Tools You Might Like
Board Foot Calculator
Related DIY project tool — board foot calculator
Use tool →Transformer Sizing Calculator
Related DIY project tool — transformer sizing calculator
Use tool →Sewer Line Sizing Calculator
Related DIY project tool — sewer line sizing calculator
Use tool →Heat Treatment Calculator
Related DIY project tool — heat treatment calculator
Use tool →Tooling Leather Selection Guide
Related tool — tooling leather selection guide
Use tool →Tool Information
Related Tools You Might Like
LumberCalculator
Lumber Hesap
BoardFeetCalc
Board Feet Hesap
WoodStainMixer
Wood Stain Mixer
WoodFinishCalc
Wood Finish Hesap
De ki:
Rehberlik
JointCalculator
Ahşap Ortak Hesap
Surfboard Volume Hesap
Kilonuz, deneyim seviyeniz ve dalga koşullarınıza dayanan mükemmel sörf hacmini hesaplayın.
Wave Height Converter
Farklı dalga yükseklik ölçümleri (yüz yükseklik, Hawaii ölçeği, okyanus swell).
Scuba Dive Planlayıcı
Scuba dalışını derinlik sınırları, alt zaman ve güvenlik depresyon gereksinimleri ile planlayın.