관련 기사
자주 묻는 질문
Post-Processing Guide
Sanding, priming & painting steps by material
Step-by-Step Process
Remove supports
Use flush cutters or needle-nose pliers
Light sand (optional)
220 grit to clean support marks
Clean surface
Isopropyl alcohol wipe
Products Needed
Safety Notes
- > PLA is biodegradable and low-toxicity
- > Wear a mask when sanding to avoid microplastic inhalation
사후 처리 가이드 — 무료이며 빠르며 브라우저에서 작동합니다. 설정이 필요하지 않습니다. 그냥 열고 사용하기만 하면 됩니다.
Related Tools You Might Like
Dimensional Accuracy Calculator
Related 3D printing tool — dimensional accuracy calculator
Use tool →Enclosure Temperature Guide
Related 3D printing tool — enclosure temperature guide
Use tool →Bridging Distance Estimator
Related 3D printing tool — bridging distance estimator
Use tool →Three D Model Scale Calculator
Related 3D printing tool — three d model scale calculator
Use tool →Luggage Weight Calculator
Related tool — luggage weight calculator
Use tool →Tool Information
Related Tools You Might Like
지원 물자 Estimator
이 무료 온라인 도구로 예상 지원 자료
Enclosure 온도 가이드
울안 온도를 위한 가이드
Retraction 설정 가이드
Retraction 설정 가이드
층 높이 자문
Layer Height Advisor - 무료 온라인 3D 프린팅 도구
Spool 호환성 검수원
이 무료 온라인 도구로 spool 호환성 확인
무게에 필라멘트 길이
필라멘트 길이 - 무료 온라인 3D 인쇄 도구
Surfboard 볼륨 계산기
무게, 경험 수준 및 파 조건을 기반으로 완벽한 서핑 보드 볼륨을 계산합니다.
Wave Height 변환기
다른 파 높이 측정 사이 변환 (얼음 높이, 하와이 규모, 바다 swell).
스쿠버 다이빙 플래너
심도 제한, 바닥 시간 및 안전 감압 요구 사항으로 스쿠버 다이빙을 계획하십시오.