Edge 끝마무리 가이드

연락처

Recommended Method
Burnishing
5 steps
1

Bevel the Edge

Use an edge beveler matching your leather thickness. Run along both sides of the edge to round it.

Edge beveler (size 1-3)
Tip
A size 2 beveler works well for 5-8oz leather.
2

Sand Smooth

Sand the edge with progressively finer grits: 220, 400, then 600. Sand along the length, not across.

Sandpaper (220, 400, 600 grit)Sanding block
3

Apply Gum Tragacanth

Apply a thin coat of gum tragacanth or Tokonole to the edge. Let it absorb for 30 seconds.

Gum tragacanth or TokonoleApplicator or wool dauber
4

Burnish with Canvas

Rub firmly with canvas or denim scrap using rapid back-and-forth motion. Edge should become glossy.

Canvas or denim scrapWooden burnisher (optional)
5

Optional: Edge Paint/Coat

For a colored or extra-smooth edge, apply edge paint after burnishing. Sand between coats.

Edge paint (Uniters, Giardini)Edge creaser or spoon

Tool Information

카테고리
🔧 Leatherworking
유형
브라우저에서 처리
태그

📤 Share This Tool

Edge 끝마무리 가이드 - Gratis Online | NavajaSuiza Digital