三点照明
3ポイント照明ガイド
ThreePointLighting
Three Point Lighting Guide
This is a placeholder component. Add your functionality here.
Professional three-point lighting setup combining key light, fill light, and backlight for professional-quality portraits.
Características Principales
Key light positioning at 45-90 degree angles
Fill light reducing shadows without eliminating dimension
Backlight creating separation and edge definition
Lighting ratio calculation between key and fill lights
Modifier selection for each light position
Classic and modern three-point variations
How to Use Three-Point Lighting
Set Up Key Light
Position main light at 45-90 degrees to camera at subject height or slightly above
Position Fill Light
Place fill light on opposite side at lower intensity to fill shadows (typically 2:1 or 3:1 ratio)
Add Backlight
Position light behind subject above head height pointing toward camera for rim lighting
Measure Lights
Use incident meter to verify key-to-fill ratio and backlight intensity
Compose Shot
Frame subject with proper positioning relative to lights for flattering angles
Shoot and Refine
Take test shots and adjust light positions or intensity for desired effect
Casos de Uso
Professional portrait studio sessions with consistent high-quality results
Corporate headshots with professional appearance and proper lighting
Interview and talking-head video with professional lighting setup
Product photography with dimensional, professional lighting
Preguntas Frecuentes
Why is three-point lighting the standard?
It provides complete control: main light for modeling, fill for shadow detail, and backlight for separation and dimension.
Do I need separate power for each light?
Not necessarily. Monolights or strobes can work from single power source, or mix continuous and flash lighting.
What is the ideal key-to-fill ratio?
Common ratios are 2:1 (flattering), 3:1 (moderate shadow), or 4:1 (dramatic). Adjust based on subject and style.
Can I do three-point lighting with only two lights?
Yes, using reflectors for fill light. Reflectors provide free fill light using the key light source.
How far should lights be from subject?
Typically 3-6 feet, depending on modifier size and desired effect. Closer for softer light.