Guide de fusion et pour additifs
Guide pour les additifs fondus et versés
Reference guide for maximum recommended additive amounts in melt & pour soap bases. Exceeding these can cause sweating, softening, or poor lather.
Key rule: Total additives should not exceed 3-5% of base weight. Melt base to 140-150°F maximum to preserve clarity and lather.
Fragrance Oil
Min
2%
Max
3%
Add at 140-150°F. Stir gently to avoid bubbles. Too much causes sweating.
Essential Oil
Min
1%
Max
3%
Some EO accelerate trace. Add at cool temperatures. Check IFRA limits.
Mica Powder
Min
0.5 tsp
Max
1 tsp per lb
Mix with a small amount of rubbing alcohol or oil before adding. Gives shimmer.
Oxide Pigment
Min
0.25 tsp
Max
1 tsp per lb
Disperse in oil first. Provides opaque, solid color. Very concentrated.
Liquid Dye
Min
2-3 drops
Max
8-10 drops per lb
Water-soluble dyes can bleed. Use soap-safe dyes only. Very little needed.
Botanicals / Flowers
Min
0.5 tbsp
Max
1 tbsp per lb
Most botanicals turn brown in soap. Use on top or embed. Dried flowers work best.
Clay
Min
0.5 tsp
Max
1 tsp per lb
Bentonite, kaolin, or French green clay. Disperse in water first. Adds slip and detox.
Exfoliants
Min
0.5 tbsp
Max
1 tbsp per lb
Pumice, oatmeal, seeds, coffee grounds. Add just before pouring. Can sink if base is too hot.
Butters / Oils
Min
0.5 tbsp
Max
1 tbsp per lb
Shea, cocoa, or mango butter. Adds moisturizing. Too much softens the bar.
Aloe Vera
Min
0.5 tsp
Max
1 tsp per lb
Use aloe vera gel. Soothing and moisturizing. Too much reduces lather.
Honey
Min
0.5 tsp
Max
1 tbsp per lb
Adds humectant properties. May darken soap. Dissolve in small amount of warm water first.
Glitter
Min
Pinch
Max
0.5 tsp per lb
Use cosmetic-grade glitter only. Some countries restrict microplastic glitter in rinse-off.
General M&P Tips
- • Spray with rubbing alcohol after pouring to remove surface bubbles
- • Work quickly — M&P base sets faster than cold process
- • Store finished soaps in airtight wrapping to prevent sweating
- • Use a double boiler or microwave in 30-second bursts to melt base
Guide des additifs Melt And Pour – gratuit, rapide et fonctionne dans votre navigateur. Aucune configuration requise, ouvrez-la simplement et commencez à l'utiliser.
Related Tools You Might Like
Candle Wax Calculator
Related candle and soap making tool — candle wax calculator
Use tool →Hot Process Soap Calculator
Related candle and soap making tool — hot process soap calculator
Use tool →Soap Fragrance Calculator
Related candle and soap making tool — soap fragrance calculator
Use tool →Soap Cure Time Tracker
Related candle and soap making tool — soap cure time tracker
Use tool →Vitamin D Calculator
Related health and fitness tool — vitamin d calculator
Use tool →Tool Information
Related Tools You Might Like
Calculatrice de savon Superfat
Calculez le savon superfat avec cet outil en ligne gratuit
Estimation du temps de combustion des bougies
Estimer le temps de combustion de bougie avec cet outil en ligne gratuit
Calculatrice de cire de bougie
Calculez la cire de bougie avec cet outil en ligne gratuit
Calculatrice de la fragrance du savon
Calculer le parfum de savon avec cet outil en ligne gratuit
Guide de calibrage de la bougie Wick
Guide pour le calibrage des mèches de bougies
Calculateur du coût de la bougie
Calculer le coût de la bougie avec cet outil en ligne gratuit
Calculatrice de volume surfboard
Calculez le volume de planche de surf parfait en fonction de votre poids, votre niveau d'expérience et vos conditions d'onde.
Convertisseur de hauteur d'onde
Convertir entre différentes mesures de hauteur des vagues (hauteur de la face, échelle hawaïenne, houle océanique).
Planificateur de plongée
Planifiez votre plongée avec des limites de profondeur, du temps de fond et des exigences de décompression de sécurité.